Automated Test Lanes
MOT Automated Test Lanes


MOT Automated Test Lanes

 



Class 7 Automatic Test Lane -
                                                              £36,485
                                                             

Consists ::
Eurosystem Control Console with remote control & 17" flat screen plus Printer
Brake Tester IW2 - 8 ton axle load with static weighing
Carlift - 4 post lift 5.1m with PMS play detector
Turnplates
HPJ 2.8 ton Jacking Beam
Lite 1.1 Beamtester with above floor rails
2 x Convex mirrors
Brake Pedal Depresser
Installation to a prepared site.

Options ::
Extra charge for DUO +1 scissor lift instead of 4 post lift                          £5,950
Extra charge for ZS square under-floor lift instead of 4 post lift                £1,590
Extra charge to add for FWT1 Shock Absorber Tester                             £4,860
Extra charge to add for SA2 Shock Absorber Tester                                £7,430
Extra charge to add MINC Side Slip Tester                                                £2,155

 
 
 
Euro System Control console for automated MOT test lane.

A class 7 MOT automated test lane will allow you to test not only cars but larger vans - Transits, Sprinters etc, steal a march on your competitors, upgrade to a class 7 automated test lane and increase your profits !

Fully automatic test procedure with operator guidance & Windows based PC application for user-friendly operation

Typical Modular Eurosystem set up
Modular system allows for the easy intergration of additional facilities at a later date.

    • Each floor group has its own control module as a programmable electronic unit.
    • All control modules of the connected floor groups and external devices and console are connected by the
      LON machinery network.
    • Modular technology assures trouble-free adaption and / or retro-fitting of any number of devices.
    • Central data management reduces the possibility of errors.
    • Time-saving 'one-time only' input of customer information and vehicle data.
    • History of all relevant measurements and test data as well as target / actual documentation.
    • Networking of test equipment with other workshop systems through 'asanetwork' e.g. commercial software,
      time recording, spare part procurement etc.

DUO + 1 scissor lift - networks into automated test lane.
DUO + 1            Exactly horizontal runways for wheel alignment.
Pinch point protection and synchronization check by light barrier.
Both runways independently adjustable (accuracy approx. 1/10 mm)


DUO + 1 scissor lift option 4.2 ton
with optional axle lift

Maintenance-free cylinder system.


Cables and hoses protected by installation inside scissors tubes.

Surface mounting or infloor installation

Manual lowering function as standard

High throughput by shortened raising / lowering time of 20 s or 12 s (optional)



ZS square underfloor car lift.
ZS Square underfloor lift option

Lite 1.1 Beam Tester
Lite 1.1 Beamtester
   

Full foundation plans will be supplied for your chosen options, our engineers will then install your new automated test lane to your prepared site. click to view a typical foundation drawing.

website design hosting by NetProxy